Fast blinking red The object is failed. Off No subscribe. Table 2 Programmable key LEDs for Presence LED Status Description Steady green The object
2 Initial connecting and Settings 2.1 Connect the phone 2.1.1 Connect to network Step 1: Connect the IP Phone to the corporate IP telephony network.
Step 2: Connect the handset to the handset port by the handset cable in the package. Step 3: connect the power supply plug to the AC
2.2.1 Network settings Make sure that network is connected already before setting network of phone. DW-310/DW-310P uses DHCP to get WAN IP configura
2. Press Back six times to return to the idle screen. 3. Check the status, the screen shows “DHCP”, If the screen shows the IP address and gateway w
3 DW-310/ DW-310P’s basic function 3.1 Making a call 3.1.1 Call Device You can make a phone call via the following devices: 1. Pick up the handset,
3.3 DND Press DND softkey to active DND Mode. Further incoming calls will be rejected and the display shows: icon. Press DND softkey twice to dea
3.7 Mute Press Mute button during the conversation, icon will be showed in the LCD. Then the called will not hear you, but you can hear the calle
3.10 Multiple-way call If user has 2 line calls and wants to invite the three party during the call, they can press Conf or Transf “New Call”, pres
4 DW-310/ DW-310P’s advanced function 4.1 Call pickup Call pickup is implemented by simulating pickup function of PBX. it’s that, when A calls B, B
Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operat
contact B, A also can cancel the redial function by dialing an appointed prefix plus B’s number before making the redial function. *3* is appoint
2) Use the navigation keys to highlight the options. You can read the message in the Inbox/Outbox. 3) After view the new message, you can press Repl
you have two options: Line Key Settings and Function Key Settings, choose one you want to make the assignment, use the navigation key to choose the
Flash Headset History Hold Hot Desking: Pressing the key, you can clear all sip information and register yourself sip information.
5 DW-310/ DW-310P’s other functions 5.1 Auto Handdown 1. Press Menu ->Features-> Enter->Auto Handdown-> Enter. 2. Set the Mode Enable
5.5 Auto Redial 1. Press Menu ->Features-> Enter->Auto Redial-> Enter. 2. Choose Mode Enabled or Disabled through the navigation key. If
5.10 Password Dial 1. Press Menu ->Features-> Enter->Password Dial-> Enter. 2. Enable this function, you can also set Prefix and Length
6 DW-310/ DW-310P’s basic settings 6.1 Keyboard 1. Press Menu ->Settings-> Enter->Basic Settings-> Enter->Keyboard->Enter. 2. Ther
6.5 Time & Date 1. Press Menu ->Settings->Enter->Basic Settings-> Enter->Time & Date->Enter. 2. You have two options to ch
7 DW-310/ DW-310P’s advanced settings 7.1 Accounts Press Menu->Enter->Advanced settings, and then input the password to enter the interface, t
Table of Content 1 INTRODUCING DW-310/DW-310P VOIP PHONE ... 6 1.1 THANK YOU FOR YOUR PURCH
8 Web configuration 8.1 Introduction of configuration 8.1.1 Ways to configure DW-310/DW-310P has three different ways to different users. Use pho
After you configure the IP phone, you need click save button in config under Maintenance in the left catalog to save your configuration. Otherwise
(Static, DHCP, PPPoE), MAC address, the IP address of WAN port and LAN port, ON or OFF of DHCP mode of LAN port and bridge mod Accounts Shows the ph
IP Address Input the IP address distributed to you. Subnet Mask Input the Netmask distributed to you. IP Gateway Input the Gateway address distribu
User Authentication Password Input your SIP register password. SIP User Input the phone number assigned by your VOIP service provider. Enable Regist
Password Input your ADSL password. Notice: Click【Finish】button after finished your setting, IP Phone will save the setting automatically and reboot,
Greeting Words The greeting words will display on LCD when phone is idle. It can support 12 chars. the default chars are VOIP PHONE. Notice: the ma
Mask MAC Address The current MAC address of the phone. Current IP Gateway The current Gateway IP address. Please select the proper network mode acc
If you uses PPPoE mode, you need to make the above setting. Service Name It will be provided by ISP. User Input your ADSL account. Password Input yo
amended automatically according to the IP address and Netmask. You need reboot the phone and the DHCP server setting will take effect. NAT Select NA
4.8.3 Voice Mail ... 21 4.9 PROGRAMMABLE KEY CONFIGURATIO
In chart 1, there is a layer 2 that switches without setting VLAN. Any broadcast frame will be transmitted to the other ports except
QoS Configuration Link Layer Discovery Protocol (LLDP) Settings Enable LLDP Enable LLDP by selecting it. Enable Learning Function After enabling
of the value is 0-7. Audio 802.1p Priority Specify the value of the audio 802.1p priority, the range of the value is 0-7. LAN Port VLAN Settings LA
HTTPS Port Before using the https, you must download https authentication certification into the phone, then set web browser port, the default is 44
8.3.2.5 DHCP SERVICE DHCP SERVICE Field name explanation DHCP Lease Table IP-MAC mapping table. If the LAN port of the phone connects to a device,
Leased Time Set the Lease Time of the lease table. DNS Server Address Set the default DNS server IP of the lease table; Click the Add button to su
TIME&DATE Field name explanation Simple Network Time Protocol (SNTP) Settings Enable SNTP Enable SNTP by selecting it. Enable DHCP Time Enable
Date format Specify the date format. Daylight Saving Time Settings Enable Enable daylight saving time. Offset(minutes) Setup the variety length.
SIP Config Field name explanation SIP Line Choose line to set info about SIP, there are 4 lines to choose. You can switch by【Load】button. Basic Set
8.3.1.4 LANGUAGE ... 35 8.3.2 NETWORK ...
Codecs Settings Disable Codecs/Enable Codecs Use the navigation keys to highlight the desired one in the Enable/Disable Codecs list, and press the
MWI Number Specify the MWI Number; Please contact your system administrator for the connecting code. Different systems have different codes. Subscri
will turn off the function immediately. Busy CFwd On Code Set the Busy CFwd On Code, when you choose to enable the busy forward function v on your p
Keep Alive Interval Set examining interval of the server, default is 60 seconds. User Agent Set the user agent if have, the default is VoIP Phone 1.
Auto TCP Set to use automatically TCP protocol to guarantee usability of transport as message is above 1300 byte Enable Strict Proxy Support the s
8.3.3.2 IAX2 IAX2 Config Field name explanation Status Shows if the phone has been registered the IAX2 server or not. Server Address Input your I
Voice Mail Number Specify the voice mail’s number. Voice Mail Text Specify the voice mail’s name. Echo Test Number Set echo test number. If IAX2 se
STUN Field name explanation Simple Traversal of UDP through NATs (STUN) Settings STUN NAT Traversal Shows STUN NAT Transverse estimation, true mea
Use STUN Enable/Disable SIP STUN. Notice: SIP STUN is used to realize SIP penetration to NAT. If your phone configures STUN Server IP and Port (defa
DIAL PEER Field name explanation Phone number There are two types of matching conditions: one is full matching, the other is prefix matching. In th
9.1.4 Maintenance and management ... 95 9.2 DIGIT-CHARACTER MAP TABLE ...
2) All: xxx, it means that xxx will replace some phone number. 3) Del: It means that phone will delete the number with length appointed. 4) Rep: I
The phone will automatically send out alias number adding your dialed number, if your dialed number starts with your set phone number. When you dia
AUDIO Configuration Field name explanation First Codec The first preferential DSP codec: G.711A/u, G.722, G.723, G.729. Second Codec The second pr
Speakerphone volume Specify Speakerphone Volume grade. Ring Volume Specify Ring Volume grade. G722 Timestamps 160/20ms or 320/20ms is available. G72
FEATURE Field name explanation Do Not Disturb Select DND, the phone will reject any incoming call, the callers will be reminded by busy, but any o
Redial whether redial, when the caller is busy or rejects. Auto Redial interval Specify the Auto Redial interval. Auto Redial Times Specify the Au
Call Number locked, you can dial the emergency call number. Enable Password Dial Enable Password Dial by selecting it, When number entered is beginn
001. X and are wildcard x means matching any single digit. For example, 4xxx expresses any number with prefix 4 which length is 4 will be forbidden
DIAL PLAN Configuration Field name explanation Basic Setting Press "#" to Send Set Enable/Disable the phone ended with “#” dial. Dial
separated by commas, or a list of digits. * Match any single digit that is dialed. . Match any arbitrary number of digits including none. Tn Indica
1.3 Keypad Key Key name Function Description Navigation Navigation key assist users for operating. In desktop, dialer, calling, desktop long
Contact Field name explanation Phonebook Table Name Shows the name corresponding to the phone number. Shows the detail of current phonebook. Not
many or a contact, and delete all contacts. Add Contact List Name Specify the name corresponding to the phone number. Office Number Specify the off
Note: End with DOT (.) when set up the white list. 8.3.4.5 REMOTE CONTACT You need to match a XML Phonebook address and you can directly access
8.3.4.6 WEB DIAL You can make a call through the WEB DIAL, enter the Dial Number then press Dial, if you want to finish the talk, press Hang-up. 8
Function Key Field name explanation Contrast Set contrast of screen. Enable Backlight Set enable/disable backlight. Line Key Settings Line: select
8.3.5.2 SOFTKEY SOFTKEY You can configure different functions in different screens for every softkey.
8.3.6 Maintenance 8.3.6.1 Auto Provision DENWA endpoint supports PnP and DHCP and Phone Flash to obtain the parameters. The PnP and D
Auto Provision Field name explanation Auto Update Setting Current Config Version Show the current config file’s version. If the version of the conf
Plug and Play Enable PnP Enable PnP by selecting it, than the phone will send SIP SUBSCRIBE messages to a multicast address when it boots up. Any S
8 levels in debug information: Level 0---emergency: This is highest default debug info level. You system cannot work. Level 1---alert: Your system h
Hands-free Make the phone into hands-free mode. Indicator light If the light blinking, indicate there is incoming call. Soft key 1/2
WAN packet stream of the phone, then open or save the file as the interface. Stop Click the end button to stop capturing the packet stream. 8.3.6.3
8.3.6.4 UPDATE You can update your configuration with your config file in this web page. Update Field name Explanation Web Update Web Update Cli
config file which includes several modules that need to be imported. For example, you can download a config file just keep with SIP module. After re
Access Configuration Field name explanation Keyboard Password Set the password for entering the setting menu of the phone by the phone‘s key board.
8.3.6.6 REBOOT If you modified some configurations which need the phone’s reboot to be effective, you need click the Reboot, then the phone will r
Set initial IP address in the Start IP column, Set end IP address in the End IP column, and click Add to add this IP segment. You can also click Del
two access lists: one for filtering input packets, and the other for filtering output packets. Each kind of list could be added 10 items. We will gi
we usually say. DMZ config: In order to make some intranet equipment support better service for extranet, and make internal network security more
NAT Configuration Field name explanation IPSec ALG It is an encryption technology. Select it to enable IPSec ALG, the default is enabled. FTP ALG
PPTP ALG Select it enable PPTP ALG, the default is enabled. Shows the NAT TCP mapping table Shows the NAT UDP mapping table Transfer Type Select the
Handset Port type: RJ-9 connector 1.5 Icon introduction Icon Description Call out Call in Call hold Auto answer Call mute Contact DND(Do not
VPN Configuration Field name explanation VPN IP Shows the current VPN IP address. Select L2TP. You can choose only one for current state. After you
8.3.7.5 SECURITY Security Field name explanation Update Security File Select Security File Select the security file you want to update, then clic
you need input user name and password again.
9 Appendix 9.1 Specification 9.1.1 Hardware Item DW-310/DW-310P Adapter (Input / Output) Input: 100-240V Output: 5V 1A port WAN 10/100Base- T
- 94 - Automatically select calling line, if one line can’t be connected, the phone can auto
- 95 - Wan Port supports main DNS and secondary DNS server can select dynamically to get DNS
Kommentare zu diesen Handbüchern